Where can I download resonance test papers

SL4_User Instructions_V5

Page:
1. Summary of all functions ............................................. ...................................... 3
1.1. Front view ................................................. .................................................. ..... 3
1.2. Front view ............................................... ....................................... 4
1.3. Fast - charger and battery packs ............................................. ....................... 4
1.4. Included supply................................................ ........................................ 5
1.5. Optional accessories ................................................. .................................................. .6
2. Description of the EAV system SL 4 ......................................... ....................................8th
3. Commissioning of the EAV system SL 4 ......................................... ................................. 9
3.1. Operating instructions ................................................. ................................................ 9
3.2. Warning notices ................................................. .................................................. ..9
3.3. Commissioning the device ............................................... ............................... 10
3.4. Charging the battery pack ............................................... ........................................ 11
4. Conductivity measurement ............................................... .................................................. ............ 12
4.1. Exogenous influences on the measurements ............................................. .................. 12
4.2. Preparing the patient ............................................... ................................ 13
4.3. Preparation of the doctor ............................................... .................................... 13
4.4. Hand - to hand - measurement ............................................ ................................... 14
4.5. Point search at the measuring points .............................................. .......................... 15
4.6. Carrying out the point measurement ............................................... ....................... 16
4.7. Self-measurement ................................................. ................................................. 17
5. Resonance test ............................................... .................................................. .................. 18
5.1. Procedure for the resonance test ............................................... ..................... 18
6. Overview measurement ............................................... .................................................. ......... 20
6.1. Carrying out the measurement ............................................... ................................ 20
6.2. Overview measurement protocol ............................................... ....................... 21
7. Therapy with 10 Hz - tilting vibrations ......................................... .......................... 22
7.1. Implementation of the therapy ............................................... ................................ 23
7.2. Dismantling - example ............................................... ................................................ 24
7.3. Rolling over - external treatment ............................................... .............................. 25
7.4. Scar disturbance field search ................................................. ........................................ 26
7.5. Needle stimulation ................................................. .............................................. 26
8. Herd test - dental irritation ............................................. .................................................. .......... 27
8.1. Basics ................................................. .................................................. .... 27
8.2. Implementation of the dental stimulus ............................................... ............................. 27
9. The selective field therapy ............................................ .................................................. 29
9.1. Execution of the SFT ............................................... ....................................... 29
9.2. Duration of treatment ................................................. ............................................ 30
10. Maintenance and service ............................................. .................................................. ........ 30
11. Disposal ............................................... .................................................. .................... 30
12.Cleaning the device and the accessories .......................................... ............................... 31
13. Storage of the device and the accessories .......................................... ............................... 31
14. Technical data .............................................. .................................................. ............ 32
Declaration of Conformity ................................................. .................................................. .34
In the appendix: Extension of the instructions for use: information transmission unit
E A V measuring device SL 4 Instructions for use

Order no. items

6210 1 EAV system SL 4 with standard accessories


4115 2 hand electrodes - brass
5221 1 measuring pen for EAV system SL 1 + SL 4 (without tip)
5223 1 EAV measuring tip with cross recess
4138 1 pair of foot electrodes - brass
5230 1 quick charger for System SL 4
5240 2 battery packs for System SL 4
5134 1 large roller electrode
2116 1 connection cable for honeycomb, black
2117 1 honeycomb
2118 1 connection cable for red hand electrode, red
2119 1 connection cable for hand electrode or ampoule gripper, black
2139 1 ampoule gripper
6800 1 additional module for overview measurement
2127 1 face electrode - brass
6900 1 Instructions for use for EAV - System SL 4
3300 5 pcs. Adhesive electrode for selective field therapy
2125 1 tooth electrode for hearth test, sterilizable
2133 1 analgesia cable with 5 needle clips
2134 1 cable for selective field therapy

The parts marked with are included in the standard accessories.

Edition of these instructions for use: Feb. 1, 2007

B_SL4_5

2
E A V - measuring device SL 4 Instructions for use

1. Summary of all functions


with the associated numbered parts of the EAV system SL 4:

1.1. Front view

0 10 20 30 40 50 60 70 80 90 100

EAV - System SL 4 4
15 Drug test brightness intensity battery
fully conductance
5
0 max

Volume 6
0 max. Empty Therapy external field
sedate tonify
0 max.
7
MEDICAL NEEDS-ARTIKEL GMBH

W.WOLF 1996

14 13 12 11 10 9 8

Image 1: front view

1 = battery pack 9 = therapy current control lamp


3 = scale, foldable 10 = intensity regulator
4 = "Conductivity" light 11 = Setup / dismantling - therapy switch
5 = main switch 12 = volume adjuster
6 = charge level indicator 13 = brightness adjuster
7 = "External field" warning light 14 = shelf for honeycomb
8 = "Therapy" light 15 = Connection for MBA interface and MBA
xxxxxxxx large display

3
E A V - measuring device SL 4 Instructions for use

1.2. Front view

16 17
1
Fig. 2: View of the front

1 = battery pack
16 = safety sockets for honeycomb (if honeycomb is not in the shelf) and black hand electrode
17 = socket for measuring pen

1.3. Fast - charger and battery packs

28

21

21 = power supply unit
22 = charging plug for battery pack

26 = battery pack
27 = charging socket for charging station
28 = handle for pulling out of the
system
26
22

Photo 3: Fast charger and


Battery pack

27

4
E A V - measuring device SL 4 Instructions for use

1.4. included supply


69

41 42a 42b 43

Photo 4: Supplied accessories

41 = measuring and therapy pen 42b = hand electrode with red adapter


42a = hand electrode with black adapter 43 = honeycomb
69 = tooth electrode for hearth test
The tooth electrode for the hearth test (69) is used for various applications in the dental field, see
see Chapter 8, "Herd Test - Dental Irritation".

30 29 31 41
34

Fig. 5: Measuring and therapy pen

41 = measuring and therapy pen 31 = therapy key to switch to therapy


29 = control lamp for point search - green in conductivity mode
30 = unscrewable brass measuring tip 34 = connection plug to the device

51

52

53
Fig. 6: Cable

51 = connection cable with black safety plug, fits on the honeycomb. (0.25m)


52 = connecting cable with black safety plug, suitable for the black hand electrode and the
Ampoule gripper (1.5m)
53 = connecting cable with red safety plug, suitable for the red hand electrode and the size
Roll electrode (1.5m)

5
E A V measuring device SL 4 Instructions for use

1.5. Special accessories
61 62 65

64

66

63 Lead switch
1: left forehead-left hand
2: left hand-left foot
3: right forehead-right hand
4: right hand-right foot
5: left forehead-right forehead
6: left hand-right hand
7: left foot-right foot
left: red right: black

67

68

Fig. 7: Special accessories

61 = front electrode
62 = foot electrode
63 = additional module for the overview measurement (lead switch)
64 = ampoule picker
65 = large roller electrode
66 = adhesive electrode for selective field therapy
67 = cable for selective field therapy
68 = analgesia cable with 5 needle clips

Functional description of the special accessories:


With the help of the additional module for overview measurement (63), the front electrode (61,
Special accessories), hand electrodes (42, standard accessories) and foot electrodes (62, special accessories)
be shot at the patient. The additional module is attached to the
SL 4 plugged into the socket for the measuring pen (17). See Chapter 6,
"Overview measurement".
The ampoule gripper (64) can be connected to the safety socket (16) with the black cable (51)
be plugged in when the honeycomb (43) sits in the recess to direct ampoules in test kits
to be able to feel. See Chapter 5, "Resonance test".

6
E A V - measuring device SL 4 Instructions for use

The large roller electrode (65) is attached to the safety plug of the connecting cable (53)
plugged in, the other end of the cable is plugged into the socket for the measuring pen (17) on the SL 4.

The adhesive electrode for selective field therapy (66) is connected to the cable for
Selective field therapy (67) connected, namely the cable with the jack plug into the
Socket for the measuring pen plugged into the device (17). Then the protective film is removed from the
The adhesive electrode is removed, and the now self-adhesive electrode is attached to the desired
Glued to the skin. Now when the device is switched off, the frog clip is attached to the cable
Edge of the adhesive electrode clamped. The patient holds the hand electrode connected to the device
in the hand colateral to the adhesive electrode. See Chapter 9, "Selective Field Therapy".

The analgesia cable with 5 needle clamps (68) is used for needle stimulation. Connection
and application see Chapter 7.5, "Needle stimulation".

7
E A V measuring device SL 4 Instructions for use

2. Description of the EAV system SL 4

This elegant device was used as a measuring device for the EAV (electro acupuncture according to VOLL)
developed a simple therapy part, but without the measuring ranges for voltages and
Currents. This makes it much easier to use than the SL 1.

The practical measuring technique with this system, the therapy as well as the interpretation of the
Measurement results according to VOLL must be included before using the device on the patient
EAV courses can be learned, which are offered as a series of courses in many countries. There
the exact area of ​​application is taught as well as the possibilities and limits of the EAV.

The measuring part of the SL 4 is used to measure the conductance at the measuring points after


FULL. This application is described in Chapter 4.
The resonance test (earlier
Drug test) after VOLL possible, see chapter 5.
The therapy with tilting vibrations can be applied in different ways
Patients use what is described in detail in Chapter 7.

The EAV-System SL 4 is a network-independent device that is replaced by an exchangeable
Battery pack is supplied with power with 4 strong NiCd batteries.
The measured value is displayed on a light bar with almost no inertia. That's why you see that
Initial value without device-related overshoots, as it really is at the measuring point.
The EAV - System SL 4 is ideally suited for the newcomer, but also for the experienced
EAV tester can use it well as a travel device or a second device.
The measuring tip developed for MBA has, as with the SL 1, a cross-shaped milled cut
of only 0.1 mm wide slots, which hold the moisture and so excellent measurement results
to guarantee.

The device is supplied as a complete EAV measurement and therapy set

1 measuring pen,
1 resonance test - honeycomb
2 hand electrodes
2 connection cables with safety plug, black,
1 connection cable with safety plug, red,
1 tooth electrode
2 battery packs and
1 fast charger.

See pictures 4 and 6.

8
E A V measuring device SL 4 Instructions for use

3. Commissioning of the EAV system SL 4

3.1. Operating instructions
This device is not intended for use in areas where there is a risk of explosion!
Operating temperature: +10 ° C to +40 ° C, humidity: 30 to 95% rel, the humidity is allowed
Do not condense on the device (no dew droplets)!
The SL 4 may only be operated with accessories that are safe from a safety point of view
Usability by a person approved for testing the ready-to-use device
Test center is proven.
When using all electrodes, make sure that they are not accidentally grounded
: the electrodes must always come into contact with earthed devices and furnishings
(e.g. radiators) should be avoided. We recommend using an insulating mat (e.g. a table with
Wooden or plastic plate) to deposit the electrodes.

! Attention, observe accompanying documents. Type BF applied part

3.2. Warning notices
Please note that the simultaneous connection of the patient to a high-frequency
Surgical device can cause burns under the electrodes!
With simultaneous operation in the vicinity (e.g. 1m) of shortwave or microwave
Therapy devices can fluctuate the measured values ​​or switch off the device! There are 2
To distinguish between cases:
A) influencing the patient through exogenous influences:
The EAV is an extremely sensitive method that affects the patient in its instant
shows the overall energetic situation. The patient feels comfortable in a place or not, is of
Noise, light, colors, smells etc. influenced. Disturbing influences from the outside must therefore with the
Measurement can be avoided.
No shortwave device or X-ray device may be operated in the vicinity of the patient.
the distance to fluorescent lamps must be at least 2 m; Plastic floors or
Carpets become statically charged and provide incorrect measured values; all devices with
Mains transformers emit electromagnetic alternating fields during operation, which vary depending on the transformer
affect the measurement up to a meter. Furthermore, all power cords, lamps and
other devices connected to the network at least 1 m from the patient and also from the measuring device
keep away.
B) the direct electromagnetic influence on the SL 4:
It would only interfere with much higher field strengths, e.g. in the immediate vicinity of
Shortwave radiation equipment can occur; such a disturbance would become a trembling one
Lead to fluctuation in display; but in these error cases the device goes through one
built-in receiver into the safe state, i.e. the warning light "external field" lights up
and the light bar display and the "Conductivity" or "Therapy" lights go out
completely. The cause of the fault must be eliminated, the SL 4 then goes off after a few seconds
by itself into normal operating condition.

9
E A V - measuring device SL 4 Instructions for use

Patients with an implanted electrical device (e.g. cardiac pacemaker) should not
Electro-stimulation treatment can be subjected to without prior medical advice
has been obtained by the specialist!
The EAV-System SL 4 may only be used with accessories whose safety-related
Safe usability by one for testing the ready-to-use device
approved test center is proven!

3.3. Commissioning the device


Insert the battery pack (1) into the opening at the top left of the SL 4 as far as it will go.
Switch on by turning the main switch (5) clockwise to close the conductance measurement
activate or counterclockwise to switch the therapy part on continuously.
Check the "external field" warning light (7): it should be dark. If it shines, leaves
do not use the device for safety reasons. The displays for conductance or therapy
then remain dark, as does the display. In this case there is a strong electromagnetic
External field effective at the measuring station, e.g. from an HF device. This device is to be found
and turn it off, because under these influences no measurement is possible. After the
The external field, the warning light goes out and the SL 4 switches on again.
Check the charge status of the battery pack: this is constantly on when the device is switched on
a bar display = battery charge status display (6) is shown. Should be no more light signal
show, the device is completely discharged and is being used by the built-in voltage monitoring
circuit kept switched off to protect the battery pack.

EAV - System SL 4 4
Battery intensity
fully conductance
5
Out

6
0 max. Empty Therapy external field
sedate tonify

IZINISCHE BEDARFS-ARTIKEL GMBH


Fig. 8: Main switch and battery charge status indicator

If the battery pack is empty, pull it out and replace the full battery pack as far as it will go
slide in.
After a few years of operation, the capacity of the battery pack drops or a cell can become damaged
short-circuit, which manifests itself in the fact that a fully charged device is quickly empty again. In
In this case, please use a new replacement battery pack.

10
E A V measuring device SL 4 Instructions for use

3.4. Charging the battery pack

28
Photo 9: Charger and
Battery pack
21

The plug of the quick


Connect the charger to the mains
and a battery pack in the
Insert the adapter plug (22).
The battery packs can be used with
the fast charger as desired
26 take a long time to load.
22
If you haven't had a for a long time
Practice operation, like vacation
etc., it is advisable to choose from
The charger for safety reasons
from the network. The
The battery pack can be disconnected
Plug-in power supply without further ado
connected to the charger
stay.
The empty battery pack is after
1.5 hours full.

27

The battery pack contains NiCd batteries, i.e. all of the characteristic features of this type of battery are met
Properties on the battery pack:

You can also store empty battery packs for a long time without any problems;


it is advisable to only recharge the battery packs when they are empty - because of the
known "memory effect";
Never short-circuit the battery pack!
Do not throw empty battery packs into the fire, but dispose of them like NiCd batteries, see
Chapter 11, Disposal!

We recommend that you always keep a full battery pack in reserve and the other up to
To use discharge.

11
E A V measuring device SL 4 Instructions for use

4. Conductivity measurement
The conductance measurement provides information about the current energetic situation of the patient. We
distinguish between
Hand-to-hand measurement (provides information about the overall energetic situation of the
Patients), see chapter 4.4
Point measurement (shows very specific organ functions), see chapters 4.5 and 4.6
Resonance test (shows the effect of drugs, but also of toxins, and
possible allergies), see chapter 5
Overview measurement (allows conclusions to be drawn about the approximate location of interference fields in the
Patients), see chapter 6

4.1. Exogenous influences on the measurements


The EAV is an extremely sensitive measurement method that shows the patient in his
current overall energetic situation. This is of course also exogenous from a wide variety of sources
Factors dependent. He or she feels comfortable in a place or not, is affected by noise, light, colors, etc.
influenced. Disturbing external influences must therefore be avoided during the measurement.

There must be no shortwave device or X-ray device in the vicinity of the patient, the distance
to fluorescent lamps must be at least 2 m. Plastic floors or carpets are loading
statically and are therefore unsuitable in the area of ​​the measuring station. All devices with transformers
produce alternating magnetic fields during operation which, depending on the size of the transformers, can be up to one
Meters far. Transformer stations, which are sometimes in residential buildings, are particularly dangerous
are housed and disturb many meters. Furthermore, all power cords, lamps and others are included
devices connected to the mains at least 1 m away from the patient and also from the measuring device
hold.

The patient and the practitioner should sit on a wooden armchair. The practitioner should deal with
Insulate cloth gloves or rubber fingerlings from the patient.

Locations with geopathic disturbances are also to be avoided, including effects on the
Patients who are also measured. So it should be a dowser or commuter
Examine the measuring station.

12
E A V measuring device SL 4 Instructions for use

4.2. Prepare the patient


Since the EAV is an extremely fine measuring method, all of which have an effect on the patient
Shows disturbances, so reacts sensitively to all this, the patient must be prepared accordingly
to be measured:

If possible, all medication must be discontinued in good time before the measurement
according to the decay time, so that the patient can be measured unaffected;
Any medication that cannot be withdrawn must be shared between the doctor and the patient
to be discussed;
the patient must be ordered so that he is rested and not in a hurry, in any case
stress-free; he must appear in good time and relieve stress in the waiting room;
On the day of the measurement, he may not use any hand or foot cream or any
Body lotion, aftershave, perfume, etc., and it may only be mixed with (neutral)
Shower soap;
he must not eat or drink coffee for at least 3 hours before the measurement,
because also the digestion, i.e. the tension of the corresponding glands and organs,
is indicated by the EAV .;
Before taking the measurement, he must take off all jewelry (rings, chains, especially
battery operated clocks!); these things, as well as medicines (!), are also not allowed
remain in his clothes; a radio telephone must also be a few meters from the measuring station
removed.

4.3. Preparation of the doctor


The measuring doctor must be in a physically and mentally balanced state, should
be fully concentrated and intentionally geared towards helping the patient (mental
Component).

13
E A V measuring device SL 4 Instructions for use

4.4. Hand-to-hand measurement


The conductance between the two hand electrodes is measured here.
The normal range is 82 to 86 scale divisions (Skt). This area is by a white
marked with a horizontal line on the measuring scale.
If the patient's values ​​are too high or too low, i.e. outside of this
Normal range, the patient must be built up or broken down in the measurement according to Voll
sympathetic zone. This is absolutely necessary so that real values ​​are obtained when measuring points
can be measured.

EAV - System SL 4 4
Drug test brightness intensity battery
fully conductance
5
0 max

Volume 6
0 max. Empty Therapy external field
sedate tonify
0 max.

MEDICAL NEEDS-ARTIKEL GMBH

W.WOLF 1996

14 12

Fig. 10: Preparation of the device for conductance measurement

What is required: Connection:


Hand electrode with in the patient's right hand
black adapter (42a)
Hand electrode with red in the patient's left hand
Adapter (42b)
the connection cable to the trade. with black adapter, the other end of the cable
The safety plug (52) leads into one of the two black sockets on the front of the device (16)
the connection cable for to the trade. with red adapter, the other end of the cable leads
the red hand electrode (53). to the socket for the measuring pen (17)

Procedure:
Set the main switch (5) to "Conductivity". Now read the existing conductance on the
Scale (3).
If, in rare cases, the conductance is outside the normal range (82 to 86 points), so
you must do any point measurements with the therapy part of the SL 4 or other methods
sedate or tone (see Chapter 7).

14
E A V measuring device SL 4 Instructions for use

4.5. Searching for points at the measuring points

EAV - System SL 4 4
Drug test brightness intensity battery
fully conductance
5
0 max

Volume 6
0 max. Empty Therapy external field
sedate tonify
0 max.

MEDICAL NEEDS-ARTIKEL GMBH

W.WOLF 1996

14 12

Fig. 11: Preparation of the device for conductance measurement

What is required: Connection:


Hand electrode with in the patient's hand that is contralateral to the measurement
black adapter (42a)
the connection cable to the trade. with black adapter, the other end of the cable
The safety plug (52) leads into one of the two black sockets on the front of the device (16)
Attach the measuring pen (41) to the small socket on the front right of the device (17)

Functions of the measuring pen:


The control lamp (29) shows that the point has been found with light pressure. The
When the main switch is in the "Conductance" position, push button (31) is used to switch directly to
"Therapy" at the measuring point as long as the button is pressed.

Procedure:
The examiner should isolate himself with thin cotton gloves.
The examiner's right hand holds the measuring pen like a pen. With the
Ring finger, the examiner supports his own hand on the patient's hand (see
Fig. 13).
The point is now sought with the stylus, slowly, without special pressure and without
Moisture (watch out for sweat and too much water!).
It is best to move the stylus at an angle of 45 degrees exactly to the measuring point
to, whereby the SL 4 shows the result optically and acoustically.
The exact localization of the measuring points can be determined in the conductance measurement both by observing the display
the scale (3) as well as with the help of the built-in clay part.
The higher the skin conductance value, the higher the display (in sct.). The skin conductance has a maximum at
Acupuncture point, so the display must be as high as possible. The tone is also highest there compared to all
closely adjacent points. The green LED in the measuring and
Therapy pen (29) that lights up from a skin conductance of 20 sec.

15
E A V measuring device SL 4 Instructions for use

4.6. Performing the point measurement


Preparations and procedures as for the point search.
If the center of the measuring point has been found by careful search for a point, then the pressure is
to increase a rapid measuring pressure, with the stylus at a constant 45 degree angle
screw in with a slight lever movement.Without this lever movement, the measurement would be
painful for the patient!
If a point is measured very frequently, it can lead to trauma,
whereby it cannot be measured for a short time.
The measurements on the extremities are carried out in the same way.
Finding and measuring points requires great care and a lot of practice!

The most important criterion according to Voll's theory is the pointer waste!

Once the optimum pressure has been reached, this must be kept constant! This is the only way the reaction of the
Body can be observed in the form of the pointer drop!

The higher and faster the pointer drop, the stronger the energetic disturbance!
Literature:
The measuring points can be found in the relevant specialist literature, such as: "The measuring points
on hands and feet according to Dr. Voll "or the" Ruf Atlas ", available through MBA.

Interpretation of the measured values ​​in electro acupuncture


> -itis <= irritation, inflammation (e.g. nephritis)

> -ose <= degenerative changes (e.g. osteoarthritis, carcinosis)


standardized scale
100
total "-itis"
90
partial> -itis <1
80
strong irritation values ​​2
70

normal fluctuation range
60

50

beginning> -ose <3
40

progressive "-ose"
30
advanced "-ose"
20
Final stage of the "-ose"
10

irreparable "-ose"

1 => -itis <, can be repaired by therapy


2 => -ose <, with superimposed> -itis <, still repairable
3 => -ose ends below 30, mostly irreparable

Fig. 12: Evaluation of the measured values ​​in the


EAV

16
E A V - measuring device SL 4 Instructions for use

4.7. Self measurement
As an exercise it is possible to carry out measurements on yourself with the EAV system SL 4.

Fig. 12: Localization of the nail fold points Fig. 13: Stylus position at


on the fingers after EAV testing

17
E A V measuring device SL 4 Instructions for use

5. Resonance test
Through the Dr. Fully discovered resonance testing (formerly drug testing) can
positive and negative effects on the patient through allopathic and homeopathic
Medicines are tested as well as influences from environmental pollution, food,
dental materials etc ..
This is a phenomenon in which information from the substance to be tested is stored in
Form of radiation can be applied to the patient, which influences the measured values, i.
cause positive or negative reactions of the advertisement.
The preparations must be tested in such a way that measurements are taken at those measuring points
on which the preparation can be expected to have effects. Heart specimens should therefore be placed specifically on the heart meridian
be tested and, important from the point of view of acupuncture, its energetic point of view
Daughter organ, the small intestine.

5.1. Procedure for the resonance test

In addition to connection, the following is required:


the parts of the point measurement:
Honeycomb (43) on black connecting cable
black connection cable (51) to one of the black sockets on the front of the device (16)

When the honeycomb is placed in the recess in the device (14), no connection is required.

Procedure:
The correct connection of the honeycomb and the measuring pen can be checked by
touches the honeycomb with the probe tip of the stylus in the "conductance" position.
The display must now show 100 points.
Important NOTE:
The honeycomb may only be set up in such a way that it is isolated, i.e. NOT on one
conductive surface! (e.g. not on a metal table)
The honeycomb is provided with different bore diameters so that
Vials, tablets, ampoules etc. can be tested.
These drugs are simply placed in the honeycomb during the resonance test.

Photo 14: honeycomb

First, by measuring a point, an "initial value" without 43


Drug measured and noted. Then you use or
several drugs in the honeycomb and observed whether
the display when measuring the same point again
changed, so in the direction of 50 Skt. improved or whether
Reduce pointer waste or eliminate it entirely. If the reading is not

18
E A V measuring device SL 4 Instructions for use

changed, the drug is not at least for this partial aspect of the disease
suitable.

Important note about the resonance test:


When measuring with the drug, the acupuncture point must be carefully adjusted
so that the effect of the preparation is not drowned out.

A reliable resonance test presupposes a safe mastery of the measuring technique.

Another possibility of the resonance test:


In addition to inserting the individual ampoules into the honeycomb, you can also use
Medication groups can be sorted in the test set, see Figure 15.

After determining the original value without medication, the honeycomb is tightly above the
Drugs moved back and forth in a group-related manner. Should a reaction of the group
If the display is visible, the ampoules must be inserted into the honeycomb one at a time.
The appropriate medicament can thus be found out by observing the display.

Fig. 15: Possible uses of the honeycomb and ampoule gripper

Instead of the honeycomb test, the ampoule gripper (64,
Fig. 7) can be used. This ampoule gripper is attached to the
"Honeycomb" socket (16) is plugged in. In this case, a second person has to open the ampoule pick-up
Hold one of the drugs in the test kit while the measurement is being taken.
In this way, a large number of individual drugs can be tested in a short time.
This can be very helpful, especially for allergy and food tests.

19
E A V measuring device SL 4 Instructions for use

6. Overview measurement
The overview measurement provides information about the energy distribution in the body. Through the
Assessment of this energy distribution gives the first indications of energetic interference fields.
This helps to make the subsequent acupuncture diagnosis considerably more precise. The
different measuring sections can cause interference fields in the area of ​​the head - tooth - jaw, or in the
Make the area of ​​the upper body measurable, as well as the area of ​​the lower body.

6.1. Carrying out the measurement


You will need:
1. the lead switch (63) available as an optional accessory,
2. the front electrode (61),
3. the hand electrodes (42a and 42b),
4. the foot electrodes (62).

Connection:
To do this, first use the derivation switch (63) with its connecting cable instead of the
The measuring pen with the jack plug (0) is plugged into the socket (17) on the SL 4.
The short line pair (A) comes to the front electrode (61).
The middle pair of lines (B) come to the hand electrodes (42a and 42b).
The long line pair (C) comes to the foot electrodes (62).
Always red to red and black to black.

B.
Lead switch
1: left forehead-left hand
2: left hand-left foot
3: right forehead-right hand
4: right hand-right foot
5:
6:
left forehead-right forehead
left hand-right hand C
7: left foot-right foot
left: red right: black

Fig. 16: Cable for overview measurement

Procedure:
The measurement is carried out in a sitting position.
To do this, the patient must take off his shoes and stockings.
As with all other measurements, all jewelry, watches,
Wallet be deposited.

20
E A V measuring device SL 4 Instructions for use

Then apply all electrodes to the patient as shown in Figure 17, taking into account the following:
always the red on the left, the black on the right side of the patient!

Fig. 17: Electrodes applied to the patient

Hints:
Wait for the display to come to a standstill when reading the measured values.
The standard value is between 82 and 86 points.
The all-round measurement provides information about the energy distribution in the body.
Detection of energetic deficiencies or inflammation.
The measurements provide information on the hearth and interference fields and show signs of illness or disease.
Therapy progress tendencies.
Special attention should be paid to differences in measured values ​​of more than 10 s.
Measured values ​​on the route 7 (left foot - right foot) are up to 94 Skt. To be regarded as normal.
These increased levels are often due to the gastrointestinal tract, which
can occur as an energetic interference field via a toxin deposit.
Women during the period cannot be measured over distance 7, since values ​​are usually
are displayed with 100 points.

6.2. Overview measurement protocol

Quadrant readings
1. Left forehead - left hand
2nd hand on the left - foot on the left
3. Right forehead - right hand
4. Right hand - right foot
5. Forehead left - forehead right
6. Left hand - right hand
7. Left foot - right foot

21
E A V measuring device SL 4 Instructions for use

7. Therapy with 10 Hz relaxation oscillations


With the pulse therapy part of the SL 4 and suitable electrodes and therapy methods
many highly effective and easy-to-learn therapies can be carried out. These include below
other:
Normalization of the point measured values ​​through direct measuring point stimulation,
Normalization of the point readings by stimulating assigned acupuncture points,
Normalization of the overview measurement values,
Stove test,
Dental irritation,
Selective Field Therapy (SFT),
Treatment of flocks,
Degradation of gels,
Lymphatic drainage after oral surgery,
Pain therapy,
Transcutaneous electrical nerve stimulation TENS,
Needle stimulation in acupuncture,
Scar removal,
Blood circulation stimulation,
Treatment of cold feet.

All information on indications and effects is based on scientific work
or are from specialist literature, without guarantee!

After an acupuncture measurement, two therapy options can be used in the EAV
come. One of them is the medicinal one, with a previous resonance test. The other is that
Therapy with low-frequency breakover oscillations.

22
E A V measuring device SL 4 Instructions for use

7.1. Implementation of therapy


The "Therapy" operating mode can be switched on in 2 ways:
In the "Conductivity" operating mode, the push button (31) of the measuring and
Therapy pen (41) (page 5) held down,
or the main switch (5) is used to switch to "Therapy" mode.

EAV - System SL 4
Drug test brightness intensity battery
fully conductance
5
0 max

volume
0 max. Empty Therapy external field
sedate tonify
0 max.

MEDICAL NEEDS-ARTIKEL GMBH

W.WOLF 1996

11 10 9 8

Figure 18: Device settings for therapy

The switchover via the push button is used for direct handling of the
Measuring points for values ​​that are outside of the normal range, in order to determine them by means of up or
Bring degradation within the normal range. Switching with the main switch is used
preferably for long-term therapies, e.g. when rolling over (Chapter 7.3) or during the
Selective Field Therapy (SFT, Chapter 9).
Furthermore, it must be decided whether toning or sedation should be used. The assembly / dismantling -
Therapy switch (11) is used for this. For the direct treatment of a measuring point according to VOLL, the following applies:
if the measured value is in the degenerative range, energy must be provided through toning (building)
be fed; on the other hand, if the measured value is in the range of an Itis (inflammation), then should